MAZDA BT50 3.2L CRD OCTOBER 2011 – 2016 (WITHOUT DPF)
$1,333.22
-
$2,365.02
In stock
Only %1 left
Complete "turbo back" Manta exhaust system - available in 3" fully mandrel bent aluminised or stainless steel tubing, with the option of leaving out the diesel catalytic converter (intended for off-road use)
Product Information
| Make | Mazda |
|---|---|
| Body Type | Ute |
| Series | 3.2L CRD October 2011 - 2016 (without DPF) |
| Make Model Series | Mazda BT50 3.2L CRD October 2011 - 2016 (without DPF) |
| Model | BT50 |
| Year | 2011, 2012, 2013, 2014, 2015 |
Description
Everyone would agree, the BT50 could do with a little more poke!
Replacing the standard BT50 exhaust system with a 3†Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by derestricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler.
The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way. Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2 year warranty, or stainless steel, which carries a 10 year warranty, and is likely to last much longer!
Give your BT50 the boost in power it deserves today, by fitting the Manta exhaust system!
Replacing the standard BT50 exhaust system with a 3†Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by derestricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler.
The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way. Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2 year warranty, or stainless steel, which carries a 10 year warranty, and is likely to last much longer!
Give your BT50 the boost in power it deserves today, by fitting the Manta exhaust system!