Product Description
Everyone would agree, the BT-50 could do with a little more poke!
Replacing the standard BT-50 exhaust system with a 3” Manta Performance Exhaust has a 3-fold effect. It increases power and torque, by de-restricting the whole exhaust system, using mandrel bends, a high-flow catalytic converter, and a straight through muffler. Secondly, it makes the turbo spool much faster by allowing the exhaust gas to travel at a higher velocity. Finally, it reduces the temperature of the exhaust gasses, allowing the turbo and engine to operate cooler. The high-flow muffler ensures the exhaust noise level is not excessive, while the straight-through design does not impede performance in any way.
Using all the factory mounts, and bolting up to the factory positions, the Manta system incorporates a flex bellow for maximum longevity and protection against cracking. It’s available in aluminised steel, with a 2-year warranty, or stainless steel, which carries a 10-year warranty, and is likely to last much longer! Give your BT-50 the boost in power it deserves today, by fitting the Manta exhaust system!
To take advantage of the upgraded exhaust system, we’re also pleased to offer the Sting ECU Remap for the New BT-50. This allows for a whole host of parameters to be adjusted, delivering up to 20% improvement in horsepower and torque, and 10% improvement in the fuel economy – far better results than any plug-in chip. This tuning process is done completely in house, allowing the ECU remap to be custom written to suit your requirements. The size of the turbo on the DPF Model BT-50 is a recognised limitation for gaining maximum performance from these vehicles, therefore the Earlier models are able to obtain greater performance gains.
Configuration:
Quiet options in this exhaust system include an 8″ round, straight through sports muffler for effective noise reduction without compromising flow and performance.
Medium options have a small 4″ round hotdog resonator, for an aggressive sounding exhaust note.
DPF back systems also have the small 4″ round hotdog resonator, for a small increase over the factory noise level. However the DPF does have a large impact on the exhaust note, so large mufflers are not required.
Our twin tip exit option is fantastic for those wanting to make a visual statement with their exhaust system with a bold chrome twin side exit tip that really stands out.
DPF Back or Turbo Back?
The latest model BT-50 comes from the factory with a Diesel Particulate Filter. These are an emissions device designed to control the amount of soot emitted from the exhaust system. We have two options in our exhaust range – DPF back (similar to a “cat back” system on a petrol vehicle), or turbo back (replacing the entire factory exhaust system, including the DPF).
The turbo back system does require a recalibration of the vehicle’s Engine Control Unit (ECU) to remove certain functions associated with the DPF system. This is intended for off-road or race use only.
In the future, we plan to introduce a high flow DPF system which will give you the benefits of a performance exhaust system while ensuring compliance with road rules
Reviews
There are no reviews yet.